Results 1 to 10 of 12
Thread: Ballast pushing out cupholders
-
04-30-2020, 02:38 PM #1Member
- Join Date
- Jun 2018
- Posts
- 52
Ballast pushing out cupholders
18 craz this year the front ballast seems to be pushing out the cup holders we haven't had this issue before, the bag doesn't seem like it will really move anywhere else then where it is, has anyone else ran into this
-
04-30-2020, 02:54 PM #2
They're just full probably never gotten there before. My 17 does the same thing.
Sent from my SM-G955U using Tapatalk
-
04-30-2020, 03:46 PM #3
Same thing on my 16 Craz
Sent from my iPhone using Tapatalk
-
04-30-2020, 04:11 PM #4
not unique to moomba. my old supra and tige did the same thing.
'06 Supra Launch 20SSV-gone but never forgotten
-
04-30-2020, 05:41 PM #5Member
- Join Date
- Jun 2018
- Posts
- 52
Awesome for what ever reason. The first two years it didn't happen glad to know its usual
-
04-30-2020, 05:52 PM #6
I think the glue of that small foam padding that’s underneath the lip gets weaker over the years and from the sun and they eventually lift up from the pressure of the bag
Sent from my iPhone using Tapatalk
-
04-30-2020, 06:20 PM #7
My old outback v did this. Get some pvc pipe that’s a slightly larger diameter than the cupholder and cut it to fit inside between the fiberglass on top and floor on the bottom. In other words pull out the cupholder, and insert the pvc pipe from underneath where the ballast bag is, then put the cupholder back in. Now the bag will push on the pipe, which can’t pop out!
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
04-30-2020, 06:26 PM #8
-
05-01-2020, 11:55 AM #9Member
- Join Date
- Aug 2018
- Location
- Nebraska
- Posts
- 88
-
05-02-2020, 06:38 AM #10
I just put them in the side cupholders when I have the front ballast full.
Sent from my iPhone using Tapatalk2017 Moomba Craz