Quote Originally Posted by z28ke View Post
Been working on the boat again lately!

Installed 4 taco marine fender holders:



Removed the pads from the swim platform, transom, gunnels and bow in preparation for installing my Gatorstep kit. Found out a plastic razorblade WILL scratch the gel coat. No big deal since I had already planned on buffing the entire top half of the boat before putting the pads on. Also found out a DA polisher is not very effective at cutting gel, getting handy with a harbor freight rotary now! Going to go back over it with the DA to remove the swirls from the rotary.

Here is a pic of the “bluesteel” Gatorstep, goes perfect with the boat in my opinion:





I’ll post up some more pics when I finish the install
The darker color will look much better with your color scheme! Plus no more snaps or rivets