Ballast sensor 2019.

[The_Robo_Fighter]

Is this the ballast sensor? If so is this as high as it adjusts? Thanks.

Sent from my SM-G960U using Tapatalk

[bteeter]

That’s the overflow sensor. It cuts off the pumps automatically when the bags get too full.


Sent from my iPad using Tapatalk

[haknslash]

Yes I believe that is the sensor.

[Tabone]

I'm very jealous. I have a set of Wakemakers bags staring me down everyday. Just waiting for the boat to get out of quarantine.

[Boonejeepin]

I am not an expert but that sensor just clips around the hose. You can move it as close to the vent as you would like if you have enough wire and a place for it.


Sent from my iPhone using Tapatalk

[DanielHill]

I am not an expert but that sensor just clips around the hose. You can move it as close to the vent as you would like if you have enough wire and a place for it.


Sent from my iPhone using Tapatalk

you are right

[dakota4ce]

you are right

It’s glued to a column of pipe too—you need to add some hose at the bottom of the pipe between it and the bag outlet in order to raise the whole column.

That’s how I did it. Easy peasy.


Sent from my iPhone using Tapatalk

[Boonejeepin]

It’s glued to a column of pipe too—you need to add some hose at the bottom of the pipe between it and the bag outlet in order to raise the whole column.

That’s how I did it. Easy peasy.


Sent from my iPhone using Tapatalk

Interesting, I can see the pipe now that I look closer. The sensor is just clipped around the hose on my SE.


Sent from my iPhone using Tapatalk