![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
Roger that. I think we will get it to work. I will employ the plastic spacers to keep the sliding to a minimum and it will be good I reckon. As long as the binding is not show stopping, they do wear in a bit.
I am not a perfectionist by any stretch. But consistent function is the goal.
I also reserve the right to reverse the up/down orientation of the upper mount to make it fly. That’s a trick I have employed before, cool or not.
Sent from my iPhone using Tapatalk
i reached out to gsa and got an email from ryan i think said it should work ok and i included my year make and model 08 mobius lsv? he said send picture first . so who is telling the truth or is gsa blowing me off?
Send him the picture and find out. I think that GSA works just fine with >95% of boats so his first reaction is "it should work ok". When I talked to him, it took a bit for him to remember the transom on this hull and that was when he said "oh yeah... we tell people it won't work on that one".
2007 Mobius LSV
1989 Sanger Skier DX - sold
We are putting it onto this Launch 21 this week. Waiting for some upper actuator mounts that are a bit more compact.
Used a contour gauge to make a shim for the curved hull to create a flat hinge mount.
The mock-up works great—storage up close to swim deck and deployment in the 11 degree range.
Sent from my iPhone using Tapatalk