Page 26 of 32 FirstFirst ... 162425262728 ... LastLast
Results 251 to 260 of 320
  1. #251
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,380

    Default

    We followed the Indmar 10 hour break in to a T. I figure if it wasn’t necessary it wouldn’t be in the manual and following the break in wouldn’t hurt anything. It was a long day driving around Conroe going slow though lol.


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  2. #252
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by TXSurf4 View Post

    Also after being inspired by RC_Hinjosa we are getting a price to coat the Bimini Arms and Rev10s with the Cranberry Metal Flake when we take her back for the 20hr service. Not 100% sure if we will have it done but we are really leaning that way!

    Sent from my iPhone using Tapatalk
    DO IT!! That'll be sexy AF!

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  3. #253
    Join Date
    Aug 2017
    Posts
    1,382

    Default

    Of course we all followed the break in procedure to the letter! Everyone does!


    Sent from my iPhone using Tapatalk

  4. #254
    Join Date
    Dec 2018
    Location
    Dublin, Ohio
    Posts
    361

    Default 2019 Moomba Makai

    Quote Originally Posted by TXSurf4 View Post
    So we went and did all of the paper work today and are supposed to take delivery on the 8th if everything goes smoothly with coating and tinting.

    Also after being inspired by RC_Hinjosa we are getting a price to coat the Bimini Arms and Rev10s with the Cranberry Metal Flake when we take her back for the 20hr service. Not 100% sure if we will have it done but we are really leaning that way!

    I also wanted to find out from those of you who got your boats new, did you follow a break-in for the motor and if so what did you do? The Indmar Manual has a detailed 10hr break-in procedure that I was planning on following but wanted to see what you guys did. Any tips or pointers for the break-in? TIA


    Sent from my iPhone using Tapatalk
    Had no idea the dealer could do that, I’ll have to check w mine about paint!

    Not sure break in is 100% necessary but I’m under the impression Indmar can look back through engine history if something happens. My guess is one of the first things they do is look at the first 10-20 hours. I’m not gonna chance it. I’ll probably follow it to a T.

    I’m probably gonna change the oil more often than recommended, every 20-30 hours since we’ll be surfing so much. Bought 24qt of Ford Motorcraft oil off Amazon, works out to $40 an oil change.

    Sent from my iPhone using Tapatalk
    Last edited by Matt0520; 02-28-2019 at 09:24 AM.
    --
    2019 Craz

  5. #255
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by Matt0520 View Post
    Had no idea the dealer could do that, I’ll have to check w mine about paint!

    Sent from my iPhone using Tapatalk
    Pacific Blue arms & cans would look pretty killer on yours...

    The contrast on the tower really sets it off.

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  6. #256
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by rdlangston13 View Post
    We followed the Indmar 10 hour break in to a T. I figure if it wasn’t necessary it wouldn’t be in the manual and following the break in wouldn’t hurt anything. It was a long day driving around Conroe going slow though lol.


    Sent from my iPhone using Tapatalk
    Quote Originally Posted by Matt0520 View Post
    Not sure break in is 100% necessary but I’m under the impression Indmar can look back through engine history if something happens. My guess is one of the first things they do is look at the first 10-20 hours. I’m not gonna chance it. I’ll probably follow it to a T.

    Sent from my iPhone using Tapatalk
    Quote Originally Posted by dakota4ce View Post
    Of course we all followed the break in procedure to the letter! Everyone does!


    Sent from my iPhone using Tapatalk
    Ya my plan was to follow it to a T as well. Just wanted to see what others experiences were. I know it will definitely make for a long, slow day on Conroe but I feel it will give us good time to get acclimated to the boat as well.
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  7. #257
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    DO IT!! That'll be sexy AF!

    Sent from my Note9 using Tapatalk
    Ya I think so too! The tech at the dealer said when he mixes the paint he usually has enough to do the Sub Grille as well so we might opt for that too!

    Quote Originally Posted by Matt0520 View Post
    Had no idea the dealer could do that, I’ll have to check w mine about paint!

    Sent from my iPhone using Tapatalk
    Ya that Pacific Blue would look awesome accenting the tower and speakers!
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  8. #258
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,380

    Default

    Yeah we just packed a cooler and explored. My wife like looking at Lake houses so we just drove along the shore line day dreaming about being rich while sipping on some adult beverages


    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  9. #259
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by rdlangston13 View Post
    Yeah we just packed a cooler and explored. My wife like looking at Lake houses so we just drove along the shore line day dreaming about being rich while sipping on some adult beverages


    Sent from my iPhone using Tapatalk
    Ya there are a ton of big places to look at on Conroe!
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  10. #260
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by rdlangston13 View Post
    My wife likes looking at Lake houses so we just drove along the shore line day dreaming about being rich while sipping on some adult beverages


    Sent from my iPhone using Tapatalk
    You make this sound like you were putting around the lake in a jon boat and not your flaked out Mojo

    Sent from my Note9 using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •