The official slam your craz and surf it thread.

[Snowslydder]

I have the stock ballast of 3000lbs
-900s in the back
-700 center tank
-500 IBS

I have been putting 200lbs of lead in the front. With the other 300 in the back. I also have 2 350lb bags that i put in the back and on the surf side.

I ordered ENZOs yesterday and they will be here Tuesday. I am just going to fold them and I have a crate to put on the starboard side for storage. Just trying to find the right settings for max push

[parrothd]

I run really slow speed like 10.1 to 10.5., 55%, but you need deep water, 15ft+..

[Snowslydder]

I am in lake whatcom and it is crazy deep so depth is not an issue. I Just need to spend more time messing with it. You would think that this would be easier. The only thing i am still trying to grasp is this.

More speed means long wake with more push

Lower speed with more wake plate equals more push

They seem to conflict.

[jeremyu04]

I will try that out. I was running about 4000lbs of ballast, with the middle plate at 14% and the surf plate at 55 with the speed around 11.2 and the wave was really tall but did not have a ton of push.

https://www.youtube.com/watch?v=TrREJOaPLtc

Here is the video of me surfing with these setting and trying a 180 lol didn't work just yet.

[parrothd]

I am in lake whatcom and it is crazy deep so depth is not an issue. I Just need to spend more time messing with it. You would think that this would be easier. The only thing i am still trying to grasp is this.

More speed means long wake with more push

Lower speed with more wake plate equals more push

They seem to conflict.

Faster makes the wave length longer and the wave height shorter.

Slower makes the wave lenght shorter and wave height taller.

More bow weight will lengthen the wave but keep the height.

Push is a misleading term, really what you care about is the pocket shape and that it matches your ridding skill.

The surf plate will modify the steepness, steep is harder to ride but will push you more.

[parrothd]

https://www.youtube.com/watch?v=TrREJOaPLtc

Here is the video of me surfing with these setting and trying a 180 lol didn't work just yet.

If you ride the board backwards{revert} when you switch to healside the fin will be in the back. Much easier to learn, just dip your hand in water.

https://www.instagram.com/p/BeWgO0bn...d=ikp47j56l1zw

[Kxmoomba]

I run about 300lbs of steal plates under my bags. Takes up no room at all. About 1 inch or so. Ryno lined them then put marine carpet over them soit looka like a factory floor. I love the extra wieght.

Sent from my SM-G930V using Tapatalk

Are you trailering with the extra 600lbs of plate in the back? I want to do this and some in the bow but am worried about the extra weight on the trailer.

[gravity]

Are you trailering with the extra 600lbs of plate in the back? I want to do this and some in the bow but am worried about the extra weight on the trailer.

I do trailer with the weight. Seems ok. The bow lead does make it a little harder to get on the trailer. Sometimes it is right at the roller so you have to finesse it.

Sent from my SM-G930V using Tapatalk

[Kxmoomba]

I do trailer with the weight. Seems ok. The bow lead does make it a little harder to get on the trailer. Sometimes it is right at the roller so you have to finesse it.

Sent from my SM-G930V using Tapatalk

Perfect, I would consider led bags for the front so I can take them out too, just didn't want to have to move all of it.

[gravity]

Perfect, I would consider led bags for the front so I can take them out too, just didn't want to have to move all of it.

I have the steel plates and a fee bags full of tire weights to move around easy.

Sent from my SM-G930V using Tapatalk