Results 11 to 15 of 15
Thread: Knocking noise in new Craz
-
07-03-2018, 05:20 PM #11
Junior Member
- Join Date
- Feb 2018
- Posts
- 12
Was there ever a fix for this? Mine started rattling today 29 hours on boat
Kyle
2018 Craz
-
07-03-2018, 10:10 PM #12
Senior Member
- Join Date
- May 2018
- Location
- Waynesville, Ohio
- Posts
- 493
Just curious, if it is the exhaust and the wakeplate, do you guys have the surf pipe installed?
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
07-04-2018, 07:20 AM #13
Member
- Join Date
- Mar 2016
- Location
- Leduc, Alberta, Canada
- Posts
- 88
Had the knocking noise last year, put on fresh air exhaust over the winter and now the noise is gone.
Originally Posted by jcarter20
Sent from my SM-G950W using Tapatalk2016 Craz
-
07-04-2018, 01:12 PM #14
Senior Member
- Join Date
- Nov 2014
- Posts
- 704
The solution is to get an extra plastic washer for your wakeplate pin. You may have to shave it down for it to fit perfectly and take up all the slop between where the actuator mounts to the wakeplate.
Sent from my SM-G930W8 using Tapatalk2016 Craz.
Enzo bags.
-
07-04-2018, 01:40 PM #15
Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
This describes the noise that I'm hearing perfectly! I noticed at a boat show that the fit up of all of this is much tighter on the Supras, so it must be a cost saving measure. Fine by me.
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
Reply With Quote