Murder Max Mods

[z28ke]

So I finished up the stereo install over the weekend pulling some late nights so I could take the boat out last Sunday. Everything worked..... except a major air leak from were the sub box meets the helm wall on the bottom edge. It sounded terrible!

Remember I said I should have cut the hole for the sub a little lower....the box not being able to be pushed upwards enough was keeping it from sealing at the bottom.

To fix I ordered one of these: Atrend Universal MDF Constructed Spacer for 12 Inch Sub Boxes- Adds 3/4" to Decrease Woofer Depth https://www.amazon.com/dp/B0013NWD12..._CMegBbEX0EYEH

and cut a little bit off the top of it so it would make a perfect circle with the hole I cut. Then I drilled 8 small holes and counter sunk 4 short screws in to hold this to the wall, and 4 long screws going through the ring and into the box to hold it in place. Before I had the sub mounting screws going through the helm wall and into the box. Put some silicone around all seams for good measure.

Ignore the god awful hack job hole I cut, thank god it’s hidden lol.





Other than that this thing bumps hard! This system is crazy loud, I couldn’t be happier.

And good lord those rev10s scream with 300watts per speaker!!!



Going up to the in laws lake house this weekend so I’m hoping to finish up round 1 of the rgb LED install tonight or tomorrow night.