Replacing the rear bags was necessary to get the front ports at the bottom of the bags to send the water forward to the underseat bags. I also moved up to 1280 and there is room for so much more in the locker but not sure it would be needed. I used the WakeMAKERS 50Lx25Wx25H bags.
The underseat bags are 550lbs each. WakeMAKERS 45Lx20Wx15H. Fits really well in my opinion.
Both WakeMAKERS bag types have1 lower front port, 2 top center ports, and 2 lower rear ports which accommodate the G6 pumps with a little hose extension and a 90 degree Flowrite connector. The second connection works perfect from the factory. This is due to the WakeMAKERS bag having ports installed closer together than the factory bags.
https://www.wakemakers.com/wakemaker...llast-bag.html
I am still trying to figure out the lead placement but I have 200 under each side seat and 100 under each bow seat (far back, under the windshield) 50 under each locker bag and 50 in the nose. I am not sure where the lead will end up.
Senior Member
With the G6 what is your ballast fill times set at?
Originally Posted by Boonejeepin
Reply With Quote