Quote Originally Posted by kaneboats View Post
It's not you, it's just hard to decipher exactly what you are saying. I "think" your factory bags are 400's and all the same. The center locker under the floor should be easily replaced with one of the rear ones. It is very important to have that one full to get some weight up front. If you are running an 1180 in the L rear locker you will need even more front weight. I would find a way to put your other 400 up front either in the walkway or on or under the seats. Then move some people around.

Your best bet is to run almost equal in the rear lockers-- maybe 80-90% on the surf side. Then have your center locker full and an IBS under the front seats. Add a suckgate (you can make for under $40) on the opposite side and you will love your surf wave.
I have 2 factory bags that I can place anywhere. I currently have one in the center locker, and one in the starboard rear.
The 1100 in in the port locker.

So, move the port 400 bag to under the left front seat, fill the center and 1100.
Or get bags of equal size for the rear, 400 in the center, and get a IBS or something to work under the front seats.
Or try to fill the 1100 to match the 400 on the other side, 400 in center, and IBS

I am working on a suck gate, I have everything but the cutting board. Not sure on what thickness to purchase.