It just mounts in between the box and the speakers. It's wrapped in vinyl, which seems to act as a gasket.
2013 Outback V
Turns out one of the L7s is bad - I bought them used, so whatevs.
Soooooo, I ordered 2 new ones today, went with dual 2 ohm instead, so I'll drive the amp a little cooler.
Wednesday the subs and my repaired SXT9Qs get delivered.![]()
2013 Outback V
Oh man. The 2 ohm L712s series-parallel to 2 ohms the 2000.1 seems to be the perfect combination.
In my head, next winters project is evolving - ditching the 6.5" cabins for 8"
Has anyone done this in a Moomba yet?
2013 Outback V
Mike
2013 Outback V
- ballast: 900# rears / 400# center / 650# IBS
- audio: Exile SXT9Q x 2 towers / Kicker KM65 x 6 cabins / Xi 12 sub / Javelin & XM15.4 amps / ZLD
- FAE
- DIY suckgate
2003 SeaRay 182 -- gone but not forgotten...
Did you sell your XM9s?
2013 Outback V
I thought someone did this and posted on here but couldn't find it. There is a guy who did it in his Malibu though. If you haven't registered over at wakegarage.com I highly recommend it for the projects help and ideas. Here's a link to the post:
http://www.wakegarage.com/projects-a...rs-in-lsv-r54/
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
I finally got the XM2000.1 mounted (yep, went a month with it sitting on the floor - I'm the picture of discretion)
I've got a bunch of wiring clean-up to do still, but at least everything has a place now
![]()
2013 Outback V