Options for aviator tower speaker upgrades

[KG's Supra24]

Before any work was done .........

[drewski]

Thanks for the pics. I'm mainly looking for the screw spacing.

[KG's Supra24]

That is the Wetsounds mount. I don't quickly see that much detail on their website but they may be able to answer it over the phone? Someone else may have one handy that could measure. I'm not much help there, though.

[dusty2221]

I could possibly supply the spacers like what I used for KG, already drilled for the wire pass thru and tapped for the bolts, which would leave you needing to have them welded to your OEM blank plates. Depends on the demand for them, for just one pair it is not worth the setup again.

[BigOrange]

I would be interested in a pair, of course that leaves me needing the blank OEM plates for welding. Also, to ask another question not previously answered (due to my lack of knowledge in this area).....if someone uses these custom mount setups, you should get the Wet sounds x-mount option? And, this leaves a non-rotating speaker, correct?

[KG's Supra24]

I cannot answer that with certainty. I have swivel clamps.

I don't see the x-kit on their site anymore? You need to know if the removable base plate is the same across swivel, fixed, and x mount. I'm not sure.

[dusty2221]

You will need the Swivel clamp setup, and it breaks down into pieces to allow you to flat mount to the new adapter/plate we have been discussing, like the animation.
https://wetsounds.com/media/products...nimation01.gif

I am uncertain if they sell the Swivel clamp setup as a flat kit, but if so it would include the swivel base, the speaker mount that bolts to the top of the Rev pod, and the fork that lock it all together (which you can see those 3 components in the animation)

[MLA]

I would be interested in a pair, of course that leaves me needing the blank OEM plates for welding. Also, to ask another question not previously answered (due to my lack of knowledge in this area).....if someone uses these custom mount setups, you should get the Wet sounds x-mount option? And, this leaves a non-rotating speaker, correct?

The plates shown in the linked thread earlier, are designed for either the X-Mount or the TC3-S minus the tube clamp halves.

Are your lowers the star shaped or the triangle shaped?

[BigOrange]

Dusty, thanks for that info about the WS mounts.

MLA, my lowers are the star shape, the S-bend tower same as SG's posted pics above.

[KG's Supra24]

IF .... IF the Supra and the S-bend tower have the same upper mounting plates (they look similar) then it sounds like MLA has an option for the solution.

Are the Supra towers made by Roswell? They would probably have the answer to whether or not they are the exact same.

I know I'm crowding the space with pics ... but here are eyeball shots ....

The picture that MLA posted from a Supra ...




My pic from the Moomba S-Bend .....