Results 1 to 4 of 4
-
12-27-2016, 02:58 PM #1Junior Member
- Join Date
- May 2014
- Posts
- 5
2009 Outback direct drive propeller size?
I have a 2009 Outback** direct drive. What is the factory propeller size? Including the bore size.
I am considering getting a 3-blade Acme 543 (13 x 11.5) or the 1229 (13 x 11). I am probably 50/50 on wakeboarding and wakesurfing. My OEM prop seems to struggle wakesurfing with 1,200-lbs ballasts, trying to maintain consistent speed.
tag: impeller
-
12-28-2016, 11:11 AM #2
In the old days they were 13 x 13. Not sure if your might have been a 13 x 12. Either way, you should do better with either choice above for a heavier load.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
12-30-2016, 08:24 PM #3
Ill check mine when I get home tonight. I cant recall off the top of my head. Im almost positive its a 13x13 on mine with a 1 1/8 shaft size but Ill let you know in a couple hours. I run 2000 + in mine and I have no problems wakesurfing with my factory 3 blade
Sent from my SGH-I337M using Tapatalk2008 Moomba Outback LS
325 Indmar Assault MPI
Gravity 1 Ballast with IBS
-
12-31-2016, 05:23 PM #4
After a quick check, I confirmed the prop on my Outback is a 13x13. Hope this helps you out
Sent from my SGH-I337M using Tapatalk2008 Moomba Outback LS
325 Indmar Assault MPI
Gravity 1 Ballast with IBS