Quote Originally Posted by jmvotto View Post
for props on wake makers , they were really good to speak with and sent me a template for the mounts due to the difficultly of the xlv hull, needed to see if it will really fit.., plus I love the channel effect of the extension. still undecided.
You've done more research than I have. Interested to hear what you ultimately decide. I for one have been underwhelmed with the ghetto gate on my boat. definitely NOT enough to justify the extra hassle and space required to bring it. (I modeled mine after the surfgate on the Axis).

but something permanent that deploys at the flip of a switch--that I could get behind. Just too spendy for me to pull the trigger on this early in the game.

I would think they'd fit fine. BooneJeepin was certainly able to fit lenco actuators on his XLV for his homebrew surftabs... But I guess it'll all come down to where the wave control tabs have their mounting point for the actuator, as that will determine the steepness of the actuator angle and in turn the place on the hull where the top of the actuator will be mounted.

I guess you'll just have to do yours first and make sure it works well so I'll know if it's worth it!