Is the Mondo the right boat for me?

[snowboardcorey]

Here is a shot of the surf wake. Set up is 10.4 mph, stock ballast (center and port) full, 300lbs under the obs seat and two people in the boat. Wake plate set to 50% down. IMG_3189.jpg

[kaneboats]

You can definitely see some potential there. I think some serious nose weight is in order b/c she's looking steep even with just the minimal weight you were running. Can't wait to see some pics as folks get these dialed in. It's going to be something special.

[TJockey]

Here is a shot of the surf wake. Set up is 10.4 mph, stock ballast (center and port) full, 300lbs under the obs seat and two people in the boat. Wake plate set to 50% down. IMG_3189.jpg

Ok. I think this is my first post. That might seem dumb, but I have been trolling info for a long time (thank you for all the info!) and did not even realize that I had already reg. so I don't know if I posted along time ago. Anyway, I finally put money down on a Mondo!!! Which gets me to my question. What is an obs seat? and how did you add the #300, in a fatsac? It may sound as if I am clueless but I have been skiing since I was about 7, but from about 25-40 I was not able to do it at all. When I got back on the water I did not see much skiing...... just wakeboading. So I picked that up and now I need a v drive boat so we can surf, and on these "newer" things.... I am clueless. Just trying to decide if I should add additional ballast right away or wait. Thanks BTW love the pic of the wake, looks like a great time!

[kaneboats]

What is an obs seat? and how did you add the #300, in a fatsac?

I'm not sure where you saw "obs seat" but I'm sure someone just abbreviated the phrase "observer's seat" which simply means the seat across from the driver traditionally occupied by the observer of the skier (required by most states' laws). The ballast bags in these boats are mostly plug and play so you replace a smaller or "stock" bag with an aftermarket larger bag to increase the available weight. Good luck to you!

[marman]

I finally got my trailer swapped out today with the swing away tongue and put the Mondo in the garage. Thought I would post the dimensions of my garage. I have 20' 9" of length and it fit, barely. I had the factory mounted spare option and had to remove the spare in order to swing the tongue out of the way enough. I also had to take the trim plate down. Used a 4 1/2" drop to get it to fit under the 7 '2" door. But it fit!

[mparker2997]

Like a glove! Congratulations. I have an LSV and I "thought" that I had a tight fit me in my garage.