Results 1 to 10 of 10
-
06-28-2013, 11:39 AM #1
Junior Member
- Join Date
- Jun 2013
- Posts
- 2
Moomba Outback Swim Platform - leaves black marks on body & boat. Is there a fix?
The black on our swim platform comes off and leaves marks all over. Has anyone else experienced this and have you found a solution?
Thanks,
R
-
06-28-2013, 12:29 PM #2
Senior Member
- Join Date
- Jul 2011
- Location
- SE MI
- Posts
- 152
Mine did this... My short term solution was to scrub the hell out of it with a brush and simple green. Then soak it in armor all and I think I put WD-40 on it too... This worked for me for all of last season... Long term solution is to replace it...
2008 LSV 1100s 650IBS Reversible Pumps w\Timers
-
06-28-2013, 12:46 PM #3
Senior Member
- Join Date
- Jul 2008
- Location
- Snellville, GA & Lake Sinclair
- Posts
- 8,419
best solution is to rip it off and put something nice, new and comfy on it.
there are sheets you can buy & trim yourself from Agenda Surf & Gator Grip and there are also are a few other products available, too.
http://agendasurf.com/dir/products/b...-traction.html
-
06-28-2013, 04:22 PM #4
Senior Member
- Join Date
- Oct 2011
- Location
- Murrieta, CA
- Posts
- 257
Re: Moomba Outback Swim Platform - leaves black marks on body & boat. Is there a fix?
Had same issue on mine. Just pulled the trigger on replacement. Dino grip.
From the mobileCurrent - 2018 Moomba Craz
Past - 2013 Moomba Mojo
Past - 2004 Moomba XLV
-
07-08-2013, 05:28 PM #5
Junior Member
- Join Date
- Jun 2013
- Posts
- 2
Thanks for sharing. I'll give this a try.
-
07-12-2013, 11:32 PM #6
Senior Member
- Join Date
- Jun 2012
- Location
- On a NorCal Lake Somewhere!
- Posts
- 536
- Putty knife
- Mineral Spirits
- Acetone
- Gasoline as a last resort (Of course NOT...well...)
- All in a ventilated area (i.e. outside)
- Call SeaDek
20130621_183746.jpg20130621_185915.jpg
20130621_191329.jpg20130628_191500.jpgSent by the random thoughts from the voices in my head...
Eric.
-
07-12-2013, 11:52 PM #7
Super Moderator
- Join Date
- Jan 2008
- Location
- Tallahassee, FL
- Posts
- 14,071
Got that out of order. 1. Call Seadek. Wait about 5 weeks. But it takes 4 weeks to scrape that crap off anyway.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
07-13-2013, 05:40 PM #8
Senior Member
- Join Date
- Jun 2012
- Location
- On a NorCal Lake Somewhere!
- Posts
- 536
You aint kidding about waiting twelve years to let that old glue harden! I waited until we had the two hottest days of the year so far (105 in NorCal) and wasn't sure if the stinging was the sweat in my eyes or the gas fumes (Which I did NOT use and do NOT recommend!)
Originally Posted by kaneboats
But I get more compliments on that stupid pad!!Sent by the random thoughts from the voices in my head...
Eric.
-
07-13-2013, 08:13 PM #9
Senior Member
- Join Date
- Jan 2013
- Location
- Northeast, PA
- Posts
- 236
I don't have the extra money to replace the factory pad. That will be my offseason project. I used Westley tire bleach and scrub brush and so far no black has been coming
2007 Moomba Outback V
-
07-13-2013, 11:46 PM #10
Senior Member
- Join Date
- Feb 2010
- Location
- Canton, Ga / Lake Lanier
- Posts
- 1,600
Moomba Outback Swim Platform - leaves black marks on body & boat. Is there a ...
Gator Grip is less than $100 for a roll large enough to cover the pad with some extra left over. www.wakejunky.com
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
Reply With Quote
