Quote Originally Posted by tgoody14 View Post
Out. Standing. That's great news Thanks MLA

I run my iPod thru the Aux on my EQ and bypass the actual factory head unit.

Hopefully turning the gains down will solve this issue! I'll have to check the crossovers and see, I can't remember what I set them at...
High pass for the cabins and towers, but I'm assuming that 5th channel for the sub is a low pass by default correct?

Thanks again
I would take the Ipod/MP3 through the head-units AUX and take advantage of the head-units 2V output to the EQ. Your headphone output is probably less then .5V.

Yes, the dedicated sub chnl on those 700.5 amps are low-pass only. So just check the 4 switches for the 8 full-range chnls.