Results 11 to 20 of 22
Thread: SeaDek Swim Platform Size
-
05-23-2013, 11:28 AM #11
I put the gator grip on my Outback platform a few years ago. I stripped the old pad off-- it came off in a million pieces so there was no tracing it. Once it was clean and all edges sanded and polished I just flipped the platform over on the back side of the gator grip sheet on the living room floor. I traced it all the way around with a Sharpie. Then I cut the inside of the line using the boss's good sewing scissors and got a perfect edge. I peeled half the backing off and got it lined up real well. Stuck half down and then peeled the other half. So I spent about 4 hours cleaning the old off and about 15 min. putting the new one on. Looked pretty good in the gray/white.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
05-23-2013, 02:02 PM #12
I just used seadek and it turned out great here was my review
https://forum.moomba.com/showthread....-Seadek-Review1998 Outback
-
05-23-2013, 03:19 PM #13
SeaDek Swim Platform Size
Kane, that's EXACTLY what I did...simple and looks great!
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-23-2013, 04:22 PM #14
I just ordered a large sheet of Storm Grey for the swim platform from seadek. They also carry black now just FYI. They told me not to get it though because it can shrink and get really hot. I think that the dark grey color will look good and not show too much dirt. If it looks bad I order the really nice pad that says moomba in it later. For now I think it will be just fine.
-
05-23-2013, 05:25 PM #15
Storm grey over black ....
2016 Moomba Mojo
2006 Supra 24SSV - Traded
-
05-29-2013, 07:59 PM #16
SeaDek Swim Platform Size
I had the storm Grey over black before and still would prefer black. Black over Blue would be cool. My Gator Grip doesn't get hot at all. I get compliments on it almost everytime we are out.
SOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
05-29-2013, 11:42 PM #17
-
05-30-2013, 09:46 AM #18Member
- Join Date
- Sep 2010
- Location
- Camp on pool 8 of Allegheny River (Adrian, PA)
- Posts
- 64
Working with Seadek now on a template for our 2003 Outback swim platform. I would like to look at the cost of the Gator Grip before purchasing anything from Seadek. Where can I purchase the Gator Grip? Bing search did not bring up any good links. Thanks
2003 Outback
Boat name = Lynn Syndrome
Its a condition that runs in the family...Judy Lynn (mother-in-law) Heather Lynn (wife) & Megan Lynn (daughter)...no known cure...but the boat helps
New boat for me on 10/9/10.
-
05-30-2013, 10:20 AM #192016 Moomba Mojo
2006 Supra 24SSV - Traded
-
05-30-2013, 12:38 PM #20
Might be worth paying attention to ....
http://www.wakeworld.com/forum/showthread.php?t=7983442016 Moomba Mojo
2006 Supra 24SSV - Traded