Quote Originally Posted by Danno View Post
Hi there, I hope someone can help with my issue.

First of all we had a 2007 Moomba lSV, we had a great surf wake and quite a good ski wake as well and all around it was great boat. We had a 1235 acme prop, we used 750 lb fly high sacs in the back corners and with a few people we had a great wave.

ISSUE: we have a new 2012 Moomba lsv and we cannot get a wave or consistency like our 07. We have tried everything the same as the old boat. We are wondering if the hull has changed and therefore it is more difficult to sink the boat (so we need more ballast?) or should we be putting ballast elsewhere in the boat too? We have the 1235 Acme prop on it and have the Digital Cruise Pro.

Any help from someone who really does know the answer that has a similar boat and year would be great and thanks!
The Hulls are the same under the rub Rail so ideally it should run the same wave in both boats.

You didnt mention if your running Regular or Goofy but non the less i think the difference is the Speed control.

So fare in the mojo my biggest complaint surfing is Speed Control Consistency.
I will set it at 10.5 or 10.8 and the boat says its going that speed but in reality its not.
Its always going slower.

Even when i get a good wave, the second and 3rd pulls are not the same wave.

What i have been doing to combat this problem is using the RPMS as my standard. I recently did a calibration on the Speed control yesterday but it was at the end of the day and wasn't able to test out my changes.

With your weighting only difference might be the hard tank, I cant recall if its also 500 in the LSV as it is in the Mojo but honestly this wont matter as much as long as its getting filled all the way.

If possible can you snap a few pictures of the wave with no one in it to see what it looks like. Also note the Speed and what exact weight bags you are using.

This forum can get it figured out for you.