Results 1 to 10 of 13
Thread: Pulled the trigger on tint
-
04-28-2013, 01:21 PM #1Senior Member
- Join Date
- Oct 2011
- Location
- Murrieta, CA
- Posts
- 255
Pulled the trigger on tint
Finally pulled the trigger on tint for the boat. I'm pleased with the result and can't wait to see her out on the water. In a couple weeks our group is putting together a fun run with 5-6 wake boats and 5-6 go fast boats being chased by a photographer in a helicopter. They got some great shots last year.
Last years video (no edit)
Current - 2018 Moomba Craz
Past - 2013 Moomba Mojo
Past - 2004 Moomba XLV
-
04-28-2013, 10:05 PM #2
Nice addition, you brave that mod yourself or have a shop do it?
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
04-28-2013, 10:22 PM #3Member
- Join Date
- Apr 2012
- Location
- Indiana
- Posts
- 40
What % tint did you go with?
05 Moomba LSV
-
04-28-2013, 11:07 PM #4Senior Member
- Join Date
- Feb 2013
- Location
- Norcross, GA & Lake Lanier
- Posts
- 223
Tinting looks really cool on black boat.
-
04-29-2013, 08:38 AM #5
Looks great!
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
04-29-2013, 10:30 AM #6
-
04-29-2013, 10:47 AM #7Senior Member
- Join Date
- Feb 2013
- Location
- Norcross, GA & Lake Lanier
- Posts
- 223
-
04-29-2013, 11:45 AM #8Senior Member
- Join Date
- Oct 2011
- Location
- Murrieta, CA
- Posts
- 255
Tint is 22%. It was done by a buddy at my house but he does it as a side job. For those trying it themselves... pull the glass off the boat and work inside the garage. Wind, direct sun and heat are all very bad things. He actually did the port side glass (seen in picture 2) on the boat before thinking about taking it out. Not sure he would have been able to do glass in front of helm if not.
Current - 2018 Moomba Craz
Past - 2013 Moomba Mojo
Past - 2004 Moomba XLV
-
04-30-2013, 02:45 PM #9
Pulled the trigger on tint
How easy/hard is it to pull the glass off!?!?
2004 Outback Blue on White *Sold
2008 LSV Blue on White
EXILED with 6 SX65-M in cabin & 2 XM9s rockin the tower
2 Kicker ZX700.5 Amps powering the entire boat with 2 10" Subs under the dash
Krypt KMA4200 EQ under driver's side dash to control all the madness
Z5 Cargo Rack annnnnnnd She's NEKKKKED....
I'm no expert, I just read up on the Moomba Forum...
-
04-30-2013, 03:12 PM #10
On the 08 LSV
you have the 2 screws on the ends by the tower feet, by fare the hardest part.
Pull the rubber strip out of the window edge
Remove the 2 center pins on the flip open portion of the windshield
Unscrew the bracing from the dash to the corners of the windshield
On the 2 sides remove apx 8 screws, 2 will be slightly different as they have a bolt under the hull.
Look up under the dash above the rubrail and you will see them. it takes 2 people, 1 with a screwdriver and one with a socket on the inside nut.
Grab the section closest to the walk-through with both hands, one near the top and one right at the base by the dash. Gently but firmly pull up, the foam will be stuck but it will break lose.
Hand the windshield to your buddy on the ground.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]