The countdown begins; my 2013 Outback V...

[muehlcj]

[QUOTE=ian ashton;212443]I got a few deliveries today; inspired by another post on here, I am going to install a heater vent behind the drivers seat, so I ordered a matching Hot Tube with chrome ring from HeaterCraft;


How does that work? Do you just Y off one of the (2) existing tubes?

[ian ashton]

Exactly - I'm going to use PVC pipe, this way I don't have to worry about puncturing the tube that will run through a storage area.

[muehlcj]

Exactly - I'm going to use PVC pipe, this way I don't have to worry about puncturing the tube that will run through a storage area.

Are your (2) tubes located in the bow walkthrough? Doesn't seem like the best location to me.

[jmvotto]

they need to do something like what Axis and Supra do and mount the anchor light on top of the tower pylon

Moomba did it on the V2 for a couple years, but no longer an option.... Hmmm glad I got mine.

[ian ashton]

Are your (2) tubes located in the bow walkthrough? Doesn't seem like the best location to me.

They are, but since they pull out I think it's a great spot - if you leave the bow cover on it makes the whole boat toasty.

[jmvotto]

They are, but since they pull out I think it's a great spot - if you leave the bow cover on it makes the whole boat toasty.

Ian , when I did my obv with the 4 port heater, I loved having a vent at the drivers feat. Two in the walkway and one behind the drivers seat.

wish my xlv had 4 , they put the heater on the port side, making it difficult to get fix heat to the starboard side.

let us know how the wye tube works with the air flow.

[ian ashton]

Will do - my '08 had 3 ports, the '13 only has 2. I figure if its not enough with the Y I'll swap out the blower box thingie.

[ian ashton]

Trailer is painted and looking good!

[ian ashton]

Got some photos of the progress; sounds like I'll be getting the boat back on Friday.

Primed;


Taped up, ready for black gel coat;


Black sprayed;


Ready for sanding and polishing;

[wolfeman131]

Looks like they're doing a great job on the repairs.