Results 1 to 10 of 16
Thread: Bimini install
-
03-28-2013, 11:28 AM #1
Bimini install
Here in the next couple weeks I will be adding a binimi to the boat(no tower), I have read all I can find on here and the rest of the internet about how to do it. I have a couple more questions if someone who has done this before can add some input. Ive read to tape it off with blue painters tape, drill holes in reverse, do a smaller pilot hole first. Sound about right so far?
Now after the holes are drilled do I need to add silicon or a pad of some sort so water doesnt get into the holes? Also is there a particular type of bit that I should use or will just a new sharp bit due?
If I am missing anything or any advice I will gladly take it as I am not excited about drilling into the boat, excited about the addition just not the holes..haha
Thanks for the input.1998 Outback
-
03-28-2013, 12:59 PM #2
Bimini install
I would recommend sanding around the edges of the holes at a 45 degree angle to reduce the chance of spider cracks.
2018 Max with a little extra weight here and there
-
03-28-2013, 01:07 PM #3
Curious what kind of tower? That may help to direct any more specific advice regarding padding/feet, support bracing, etc.
The first hole is a nail biter. They're much easier after you have that one under your belt.So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-28-2013, 01:30 PM #4
-
03-28-2013, 01:40 PM #5
Doh! I need to quit drinkin in the morning...
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-28-2013, 01:55 PM #6
Well, don't over-react.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
03-28-2013, 01:58 PM #7
-
03-29-2013, 09:40 AM #8
I know I know, everyone hates a quitter
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
-
03-29-2013, 11:23 PM #9
I was gonna try and build a T top canopy for my tower next weekend and save about 600$.
Has anyone ever had any success in doing this? Im going to try and make it strong enough to hold boards and what ever else I wanna put up there.
I googled diy canopy's but not much came up.....
-
03-30-2013, 07:45 AM #10
Bimini install
Somebody on here posted an awesome DIY of their Z5 replica