Results 1 to 6 of 6
Thread: Cooler removal
-
03-23-2013, 07:58 PM #1Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Cooler removal
Had some warmer weather today so I removed the cooler from my lsv. Getting ready for my new ballast setup..
Die grinder & sawzall
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
03-23-2013, 08:52 PM #2
very nice. i was thinking about taking my cooler out in my xlv. was gonna put 3 more batts back there for more engine off play time
2011 Xlv with 325hp and stock Gravity lll
-
03-23-2013, 11:29 PM #3Junior Member
- Join Date
- Aug 2011
- Posts
- 9
Nice ill be doing the same in the next few weeks 370 sac there I guess are you integrating it into your existing system or using a tsunami pump
-
03-23-2013, 11:35 PM #4Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Re: Cooler removal
All new system with 4 reversible pumps..
Sent from my Nexus 4 using Tapatalk 2http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
03-24-2013, 02:30 AM #5
Cooler removal
Mine's gone...cut it out last summer...in the dark...best mod I've done....
Sent from my iPhone using TapatalkSOLD! 2011 Mobius LSV 325HP EFI
Digital Cruise Pro, Wakeplate, Kenwood KM550U and KCA-RC107MR x2, Kicker ZXM700.5, Kicker 6.5 Cabins, 10'' Kicker CompVT sub, Wetsounds SYN 4, Wetsounds REV10s, Wetsounds WS420Q, Gravity VI Surf Ballast, Acme 537
Board: '12 LF Harley (Monster) 139
Her Board: '11 Ronix Krush 128
Kids Board: '13 Ronix Vision 120
Skate: LF Faction 44
Surf: LF Custom Quad & XXX
Tow Rig:
2011 Toyota Tundra CrewMax TRD Magnetic Grey
3/1 Truxx Lift, and some other stuff...
-
03-24-2013, 12:00 PM #6
I removed the one on the LSV as well last summer. Was no much nicer having the extra storage room.
New owner was glad it was gone as well.
I will however CAUTION you... If you run a ballast bag up there you need to figure out a way to mount a L brackit or something.
I was running a 450 bag for a while, and with that plus people siting on that side of the boat, the fiberglass bowed out almost 1/2inch from it normal sitting place. I have to push it back in and get it lined back up to its original place. The cooler is providing some anti-flex to that section of the boat.
Might be as easy as taking some aluminum L brace and epoxy them to the inside wall of that area, or mount it to the under side of the lip and to the floor.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]