Results 1 to 7 of 7
Thread: Seadek install good experience
-
03-22-2013, 09:48 PM #1Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
Seadek install good experience
Initially I was concerned over ordering a Seadek swim platform pad based on recent experiences
posted here, but went forward with the purchase...and all went well. I received exactly what I ordered
5 weeks after initially placing the order. The web site is still a little confusing in that even though you
choose a pad with a logo (we chose the Roo) you still need to "add" it....not logical but oh well. Also,
they send email to confirm measurements but provide a standard design that may or may not match what
you ordered. As I found out it is just to confirm measurements but I think it would make more sense
to send a design that actually reflects what you ordered. Again, not a big deal but can be improved.
It probably took me 3 hours total to pull up old pads, clean goo (used acetone), and put on new pad. I screwed up a little on the install as the pad is close, but not over, the edge on one side...not too bad.
image.jpg2008 Outback V
-
03-23-2013, 08:05 AM #2
Seadek install good experience
Looks great! I've always had good experiences with SeaDek as well - working on the design for a custom pad for our new boat now infact.
2013 Outback V
-
03-23-2013, 09:08 AM #3Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
-
03-23-2013, 09:13 AM #4
Looks great, nice color choice to makes the yellow pop on the bottom. I had one on the LSV and it lasted great for 4 summers. The only think that ever damaged it a little was the center track fin on the wake boards if they were metal and our Lab's claws when i didn't sink the rear of the boat when he was swimming LOL
Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
03-23-2013, 12:09 PM #5
Looks very Good. I personally have had good experience with them. Had a warranty issue on a pad and it was no hassle to address.
-
03-23-2013, 03:02 PM #6Senior Member
- Join Date
- Oct 2009
- Location
- Lockport, IL/Cloverdale, MI
- Posts
- 185
Thanks folks. We had to do something as the stock pad was deteriorating resulting in the infamous black footprints tracking into the boat. We hope to get a lot of years with this pad.
2008 Outback V
-
03-25-2013, 11:00 AM #7
Looks good, Bob. I think it's just the camera angle. Looks pretty straight to me.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!