Page 10 of 17 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 167
  1. #91
    Join Date
    Jan 2010
    Location
    North Texas
    Posts
    2,844

    Default

    Quote Originally Posted by kaneboats View Post
    After I spill all down the side of the boat I grab the window washer squeegee and wash the side of the boat and then squeegee it all off. Finish with a paper towel wipe.
    Same here, I do try to be a bit ahead and stick a paper towel or 30 around the nozzle, then if it gets by the windshield washer takes quick care of it.
    2006 Supra 20 - Sold
    2006 Supra 24 Gravity Games - Sold
    2015 Supra SE450 - Sold

  2. #92
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Stereo looking awesome Ian.

    Chawk yea stop being a weiner about filling your boat man LOL. JPetty does it the same as i do also, just stick it in set it to the Lowest auto setting and stand there listening to it. When its about 3 gallons from full it will sound a lot different. I also use paper towels and stuff them in the filler neck.

    @ those guys using the windhield wiper to clean the gas, now i know why i cant get a decent winshield clean LOL.

    You might even look into this, im thinking of getting one for my bike and see how it does on the boat.

    http://www.mccuff.com/
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  3. #93
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    He he he... he called you a weiner!


    PWI as usual...

  4. #94
    Join Date
    May 2011
    Location
    Flower Mound, TX
    Posts
    1,506

    Default

    LMAO... that's the nicest thing I have been called today actually.
    '08 Mobius LS. Sold
    '18 Craz "TypeO"
    REV10's, Revo6 xss, Kicker10, Kicker 12 CompR, various LED's

  5. #95
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    I made more progress yesterday; got the newty Transom LEDs installed, ran the 8AWG +/- for them, hooked up the relays for all of the LEDs, and started wiring some of the in-boat lights.

    My starting point; the single newty LED spot;


    Yes, I know, the light on the left is off-center - the drill bit for the wire wandered when I was drilling, resulting in what you see here. I'm not too worried about it, since its under water 99% of the time;


    I wanted to put them on the outside of the exhaust, but there wasn't enough room, and on the outsides of the platform brackets the hull is filled with foam, so I wouldn't be able to get the wires through without much aggravation.


    I picked up some 1/4" Starboard for the trim panel for my subs, hopefully will get to that tonight or tomorrow. Things are really coming together
    Attached Images Attached Images
    Last edited by ian ashton; 03-29-2012 at 09:34 AM.
    2013 Outback V

  6. #96
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    Whoa, thats a snug fit. I'll bet they throw a ton of light!


    PWI as usual...

  7. #97
    Join Date
    Jul 2008
    Location
    Snellville, GA & Lake Sinclair
    Posts
    8,419

    Default

    Dude, you're going to blind the guppies!

  8. #98
    Join Date
    Feb 2008
    Location
    Traverse City, MI
    Posts
    2,680

    Default

    Quote Originally Posted by newty View Post
    Whoa, thats a snug fit. I'll bet they throw a ton of light!
    Yea, I didn't measure or anything before I bought - I'm glad it worked out, lol.

    Quote Originally Posted by wolfeman131 View Post
    Dude, you're going to blind the guppies!
    After testing them out I found that they illuminate my entire garage blue - I had the "bright" idea to look at the lights, to make sure all 3 were on - yep, they were, and I saw spots for like an hour.
    2013 Outback V

  9. #99
    Join Date
    Mar 2008
    Location
    Vancouver WA
    Posts
    3,034

    Default

    Quote Originally Posted by ian ashton View Post
    I had the "bright" idea to look at the lights, to make sure all 3 were on - yep, they were, and I saw spots for like an hour.
    I did the same thing lol. Just so ya know... don't look directly into the lights cause they're bright.


    PWI as usual...

  10. #100
    Join Date
    Jun 2007
    Location
    Vancouver, WA
    Posts
    5,501

    Default

    LOL - Hey, once we get the avatars fixed I found your new one!

    So when is this "old enough to know better" supposed to kick in?

    2001 MobiusV - Slightly Modified...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •