Opinions on decal updates

[jmvotto]

Are those reflections or air pucker marks. I would call the manufacturer on these. The tufflabels etc. they should replace them if they are as reliable as advertised. the one sheet would certainly be preferable as opposed to individual letters. I assume we have a group buy revolt if all of these turn out that way.

Btw, did you have the back stripe added? looks good.

[kaneboats]

Thanks! I did the black stripe myself. I was trying to change up the look a little bit.

I had no contact with the manufacturer and don't even know who the contact was. This wasn't really a group buy. It was more like one guy who bought 5 to get a better price then sold off the ones he didn't need.

[wolfeman131]

it makes me think they are between the layers of the decal itself.

Calling Capt'n Kraig & Wild Bill!!!

Have you taken a look at yours yet?

Brandon may need to reach out to the vendor to help get this resolved.

[kaneboats]

I tried sending them a message today to see if there is something they can do. We'll see what they say as I am not their direct customer.

[jmvotto]

Calling Capt'n Kraig & Wild Bill!!!

Have you taken a look at yours yet?

Brandon may need to reach out to the vendor to help get this resolved.

I would agree, I was looking at this option for reg numbers, so i guess i will wait and see what the remedy is?

[Wildbill]

Calling Capt'n Kraig & Wild Bill!!!

Have you taken a look at yours yet?

Brandon may need to reach out to the vendor to help get this resolved.

I haven't installed mine yet.....hoping to do it soon as I have just finished buffing the gelcoat. I'm kinda nervous now. I may try the soapy water trick to give myself a larger window of installation time.

........I'll let you know how I make out.

[moombadaze]

now that ive seen the photos on here vrs the text message I see what your talking about. I dont think those bubbles will work them selves out. Sucks as I was going to give it a try too and now I dont think I will be.

But like I said, the boat looked good neked too

[keehr22]

Hey guys, I've been periodically logging in looking forward to seeing the first set installed..not the results I expected at all. I will call domelabels.com tomorrow and see what I can get done. I'll push for a refund due to total lack of quality control, or at the very least, new sets of side decals with alignment issues corrected and an explanation of how these need to be applied correctly, as it sounds like the instructions given were followed to failed results.

Sorry guys, I'll do my best to get something done here. I wish I had my boat here in TN so I could try out the soapy water method. I've always used that method with large vinyl decals and have had good luck with it.

[kaneboats]

I certainly appreciate it and I hope you know I don't blame you in the slightest. We may all be better off that one guy tried one side and stopped so we can get this worked out. The transom decal was perfect. By the way, you can see from the pictures of my stripe that I know how to install this kind of thing. That is not easy to do with a 3" stripe on a curved hull. Anyway, I look forward to hearing what they have to say.

[keehr22]

Just sent off an email, and will follow up with a phone call to Domelabels tomorrow. I placed my order with Brenda Wall at Domelabels, their number is 866.897.3663. I will ask about wet application, but I assumed since "soapy water" was discouraged in the actual instructions due to the "residue" that it wasn't a viable method. I'll update you guys as soon as I can get some answers.