Opinions on decal updates

[kaneboats]

The first pic is the transom. It was fine. The rest are the side. It took forever to line them up as the spacing guides were placed incorrectly by the manufacturer and each individual letter's plastic sheeting was not square with the letter itself. Nor was the sheeting a uniform size. Each letter's sheeting overlapped the other letters making it very hard to remove the backing, even using the "hinge" install method. Despite efforts to keep them straight-- and we did very well on that part, the instructions posted above say to press from one end to the other to remove air-- which we did-- and then to use pressure to insure good contact. They were rubbed before the final sheeting cover was removed. When it was, they looked horrible.