




Don't know about you but mine doesn't have that Nascar quick release! And I'd probably drop the bolts or something fun like that. I'd suggest making a mark on the top dead center bold or taking a picture with phone/camera. Stopping and moving the wheel. I need to do this as well as it's way off at speed.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
I don't even notice this kind of stuff but now it will be driving me nuts. Thanks, fellas. You're making work for me.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
Turn the wheel so the boat is going straight at speed and stop with it in this position, drop the rack from the bottom of the wheel, center the wheel and re-attach the rack. Also put a little grease on the rack while you have it off.
2005 Mobius LSV
325 EFI
Agree with VA LSV. Make sure your rudder is straight, drop the rack, straighten the wheel and reattach. Should take about 10 min.
I noticed I have the same issue this weekend. Like kaneboats, this is driving me crazy and now I have work to do!
2008 Moomba Mobius LSV Ballast III (stock), Heater, Roswell Quad Spin Pro, Bimini
Simple fix with the right allen wrench. Get up to your normal boarding speed, hold wheel that way, stop, fix, done! Or snap pic with phone of wheel position. Fix when you get home.
So when is this "old enough to know better" supposed to kick in?
2001 MobiusV - Slightly Modified...
Thanks will fix this weekend.
2008 Moomba Mobius LSV Ballast III (stock), Heater, Roswell Quad Spin Pro, Bimini
^ the exact answer I was expecting...
Nate
2008 XLV GG (sold)
2013 LSV