Quote Originally Posted by saskie99 View Post
Well that is very cool, and I am going to be doing this upgrade very soon.

This may sound like a dumb question but can I tee off a pump and sprinkler valve off the engine coolant intake? Our lake is very small and I am never filling ballast while underway. Normally I take the boat off of the lift and tie it to the dock and let it fill while we get ready.

I would do this rather than cut another hole in the boat. My idea would be to use the rule pump to fill the 750s in the rear and the 1200 tsunami to fill the ski locker and bow ballast.
I wouldn't do it. A better solution would be to tee off the existing ballast intake and put your extra pump there. No additional holes and no putting your cooling system at risk.