Question: Did you run your tower speaker wires...

[ian ashton]

I just wired a tower exactly like yours bro. I can send you pics or tell you exactly what i did. I used 14 gauge wire and ran them down the left side of the boat. The wire came out the hole in the tube and i sent it straight into the boat. Realy clean looking. Didnt use the connector as to me it just looks more like a hack job. I went clean and simple.

Yea, send or post a pic!

Thanks!

[ian ashton]

ian,

here is a pic of mine.

no connectors just silcone to make it water tight

I like! Where did you get that cover?

[jmvotto]

I like! Where did you get that cover?

My dealer had it, but earmark audio has them online.

http://www.earmarkcaraudio.com/Xcart/home.php?cat=306

[badasshybrid]

Heres a pic of how I did mine. You can not see it unless you are right on top of it looking for it. It is hid behind the leg of the tower, from the side you can not see it at all.

[kaneboats]

That's pretty well hidden. Very subtle.

[ian ashton]

Heres a pic of how I did mine. You can not see it unless you are right on top of it looking for it. It is hid behind the leg of the tower, from the side you can not see it at all.

Love it! I'm going to do the same, thanks for the idea.

[badasshybrid]

No problem, glad I could help you out.

[mutau052]

guys can we see how you did the top of the tower (wire output to speakers)?

pics pics.

[ian ashton]

I just ran my wires lst night - what a PITA! The left side was a cake walk, but the right took about 2 hours! The existing wires made it very difficult to feed out the bottom. I didn't have any string, otherwise I would have done the string & vacuum trick. I'll post pics in a few.

[mmandley]

Ian im concerned you ran the speaker line to the left and right. Why not run both lines down one side? You should only have 1 pair of wires, if your running 4 speakers then you wire them together to drop the ohm down and get more power to the amp.

Im also concerned as now you have to run the line around the bow, or threw the ski locker of the boat. You speaker wires on any high power system should be the same length so the signal is the same per speaker. Other wise you can actually have a speaker louder then another as its getting a stronger signal.

On a side note i was going to post pictures of the install i just did at Exile with a OB style tower but it seems the boat went home with the owner before Pics were taken...Brian....Brian... LOL