So about a week ago, I got inspiration to do a quick and easy upgrade to my subs on the boat. I was running a pair of Infinity 10's with a 2 ohm load to my sub amp. Since the amp's 1 ohm stable, I decided to buy a 3rd 10" sub and drop it down to a 1.3ohm load and have the amp push out the full 1000 watts.

Because I didn't want to spend a lot of time or effort, I found a pre-made bedliner sprayed box and used that. My existing subs were installed without removing the foot rest. So while I could have hacked out the footrest to make room for tons of airspace, I wanted quick and easy. It was a little more work than I planned, because I had to remove the existing box and squeeze in the new box forward of it. But I utilized some of the dead space under the helm and the result is amazeballs. bass times 150%!!! Net cost was $169 and one evening of time.

So now I finally have bass that keeps up with the REV410s on the tower.



sub box for two 10s removed and the new box secured to the OEM footrest.


tucked away at the stern end of the starboard bow locker.