Results 1 to 3 of 3
Threaded View
-
01-18-2007, 12:07 AM #1
Anyone using an EQ w/their system setup?
Is aonyone besides me using a EQ w/their system? I decided to go that route b/c 1.) The factory Kenwood only has 1 set of outputs and I needed 3, and 2.) I can control the volume of my tower speakers w/o turning down the volume in the boat. But, I have run into a problem w/my install that hopefully someone can help with. My EQ has a power hookup, ground hook up, and a remote hookup. I tried connecting the remote hookup the remote wire (the blue w/white strip in which my amps are hooked to) and I the EQ will not turn on. But if I hook the remote wires straight to the battery it will turn on. Anyone have any suggestons as to which wire I should connect my remote wire for my EQ to? Thanks
Similar Threads
-
Sound System Setup Question
By kbezold in forum General ChatReplies: 1Last Post: 03-30-2008, 11:48 PM -
balast setup
By moombadaze in forum General ChatReplies: 1Last Post: 02-06-2008, 07:47 AM -
I Need Help with Board Setup!
By AaronWhitt82 in forum Wakeboarding | WakeskatingReplies: 3Last Post: 12-13-2007, 02:03 PM -
Trick Ski setup?
By Waynes345 in forum Skiing & SlalomReplies: 9Last Post: 09-19-2007, 01:43 PM -
Wakesurfing setup for an LS
By npcain1 in forum Wakeboarding | WakeskatingReplies: 3Last Post: 08-20-2006, 10:14 PM