Results 1 to 10 of 12

Threaded View

  1. #1
    Join Date
    Jun 2008
    Location
    Ottawa, Ontario
    Posts
    929

    Default Steering vibration (I found the problem) *pic*

    I get steering vibration for a very short period of time with all my ballast filled and pulling up a wakeboarder. The vibration only lasts for a few seconds.

    It mostly occurs when the steering is not straight ahead - if I have the steering partially left or right when I hit the throttle, there is much more vibration than when I happen to get it straight ahead at throttle up.

    When the boat is not heavily weighted, it doesn't happen at all.

    I noticed the steering cable clamp block was loose and the sound I am hearing is exactly the same when I "jiggle" the clamp block. All 4 bolts are tight but there is lots of play inside the block.
    Attached Images Attached Images
    2008 Outback V - gravity III ballasts, perfect pass star gazer, hydraulic wake plate, depth finder, water stainer, rad-a-cage tower, board racks, tower mirror, bimini top, audio package d, graphics package e, appearance package, cockpit & tonneau cover, mooring cover, black stainless rubrail, docking lights, OJ 14.25x14.0 prop.

    Toys: Ronix Viva 136 with Kai bindings, Phase5 Drew Danielo Pro, Straight Line Sumo Sac 750lb, 450lb, 125lb ballast.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •