




J.mo,
We’d of much rather gone to Bullard’s, but the drive!!! We have friends that have houseboats there, but unless we have an invite for several days, it just isn’t worth it.
The ramp at Pyramid (Warriors) had so much algae, when we pulled out it looked like I’d driven through stewed spinach salad.
2020 SA 450 Wife calls it White Cloud. Said it makes her feel "Classy"
2017 Sanger V215sx. We call it Viagra because it's the little blue pill that gets everyone up (Sold)
Mirror looks to be on the port side. I am actually going to try this out this weekend. I use it but the thing is in the way most of the time, this might be the best of both worlds. I have seen several guys mount them on the middle window and run with it shut while surfing.
2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
Chilly weekend but still had a blast. LOVING the new boat!
IMG_0876.jpgIMG_0904.jpgIMG_0911.jpgIMG_0937.jpg
2019 Supra SL
2014 Tige Z3
2008 Tige 22VE
well obviously i'm not good at posting pics. what's the secret here? how do you add multiple at one time.
2019 Supra SL
2014 Tige Z3
2008 Tige 22VE
The latest replies on this post walk you through some of the ways you can do it.
https://forum.moomba.com/showthread....es-in-a-thread
2021 Mojo, 6.2L Raptor 400/1.76, Acme 3407 15.5x13, G6, Flow3, +6500 lbs ballast
2005 Mobius LSV (sold)
Windermere Lake, B.C., 2800' Elevation
2021 Mojo Mods
I moved mine over this weekend. the only downside is if you have the top opening glove box you might have to play with adjusting the mirror to clear it when its down.
Its 100x better on the port side. I stand up when driving so I was blocking it most of the time anyways.
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
You have the s bend on your Moomba right?
I have a 13 Supra and I’d like to get those surf pulls to block off where the factory Polk speakers are mounted on the tower.
I’m pulling them tomorrow and replacing with 2 rev410 on the tower.
Those would be a sweet solution to covering the holes.
Sent from my iPhone using Tapatalk