




Yes, you don't want to trap any moisture as that will likely cause a failure in the epoxy curing. You don't have to keep the board in the sun, just give it a few days to dry out before applying the repair.
Phix Doctor has some youtube vids that walk you through the entire process as well.
Sent from my Note 9 using Tapatalk
2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
Looks beautiful. I miss lakes that have trees and greenery. Pure desert out here.
2006 Supra Launch 21V
I know!! Lol I took that pick when I was leaving the house for work. Not gonna lie, the thought of calling in sick was looming large in my head.
Actually, most mornings and evenings look like this. The caveat is that we only have about for months of warm weather up here.
2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
Fortunately no one was surfing at the time. Was putting along to our swim spot and there was a boat behind me pulling a tuber closing in quick and a second boat to my right starting to make a turn towards me.. To my left was a point that gets shallow so I rolled onto the the throttle to get out ahead and away from them, hit a wave, the board bounced and the wind caught it flipping it up into the windshield. Crappy situation all around but no one was hurt and no serious damage to anything other than the board so I'll take it. Lake has been filled with what seems like first time boaters, especially from all of the stories from the boat ramp.
2016 Supra SA 400
Five year old Zayla now riding her board. No dad, I don't wanna kneeboard, I wanna wakeboard!! Watch out Zandar!!
2018 Moomba Max - 400 Raptor - 6 pump ballast - auto wake 2 - flow 2 - gps zero off