S Bend tower height adjustment

[Casey B]

I just purchased a 2016 Mojo with the S Bend tower. I need it to lay down farther to fit in my shop. Can someone please tell me how to do this. I have been searching and can't find anything on this.

[wetfly112]

Interested in this as well. Have a 15 mojo with same tower

[KnoxMojo]

Fold it down, look for a cable running on the under side of the tower between the tower and the base. You should see that cable that goes through to the bottom, on the under side is a big washer that limits how far down it can go. If you were to remove that washer, thus removing the limiter, your tower should go further down.

[Casey B]

I got a reply back from Roswell. This is the procedure they sent and it worked perfect. Hope this helps, just be sure to do each side separately so the tower doesn't fall.

IMG_0336.jpg

Edit: Please see the post below for larger image.

[kaneboats]

From the post above, I tried to resize the instructions up a bit:








Tower 1.jpg

Tower2.jpg

Tower3.jpg

[kaneboats]

I also posted this as a "sticky" in the HOW TO. Great work!

[wetfly112]

awesome. thanks for the info