Any Jeep guys here?

[newty]

I have an 87 wrangler that did its last emmisions test and I need to get rid of all the emmissions/Cat etc.
I just did a Nutter by-pass to bypass the ignition which controls all of the fuel/emmission etc.
The link: http://www.4x4wire.com/jeep/tech/ele...jn-ignition99/
I need suggestions on which way to go.

Which vacuum lines do I need
There is easily 50ft of vacuum lines in this thing with tie-ins to the exhaust, diphrams all over the place. Its a mess. I want to simplify things and clean it all up.

Rebuild Carb or replace
With the bypass I did I no longer need the stepper motor on the carb and don't want to replace it with a like carb. Do I need an aftermarket carb or can i rebuild the current one with any real improvement.

Not worried about milage just smooth idle and dependability.

[rc5695]

sorry man... not much experience on the older carb'd stuff. Most of what I've wrenched on is all FI.

huge gains (via butt-dyno) by replacing the cat with a straightpipe though (on a '94). Just measure length & size of pipe you need, cut out the cat, and visit the local auto parts store for the pipe (with ends already flared) and a couple of clamps.

[newty]

I've though of that but I have a couple emission tie-ins to the exhaust about 3' from the cat that need to be patched and are in a bend. So I was going to have a shop do the whole repair/removal.

[Nobodyrides4Free]

I would bet guys on Jeep forum could help you...Have you looked?

[newty]

I've read through the forums, I have yet to post or ask questions.

[kaneboats]

So you're one of those creepy lurkers, huh?

[newty]

Yea, I make myself sick. Feel kinda like Ed.

[rc5695]

i'm sure pirate4x4 has some threads on it...

[viking]

I don't have a jeep yet but I'd sure like one. My problem is I go way overboard on most the the chit that I buy and know I'd be broke the minute I bought a project. That's why my purchase list is so damn long I gotta keep it to the boat and diesel (and shop to keep them in) at the moment.
Check out poison spyder customs for some mods !!

OH - and by the way..........your nothing like ed.

[zabooda]

Hover_2aalr.jpgI have gone to this forum a few times. I don't know much about engines and drive train but I do know how to break em.

http://www.wranglerforum.com/f8/