
Originally Posted by
johntmoseley606
Well I agree but the drive shafts I was looking at on waterskis.com are the shaft with coupler pressed on. They mention not to remove the coupler. Where are yall buying your parts from?
Sent from my SM-S928U using Tapatalk
This is your choice, but I'm marking the shaft and coupler with a sharpie and separating.
No way I would pull the tank for this. The new dripless comes with an install guide for pushing the shaft up through the hull not down.
2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow