
Originally Posted by
benny32
I don't know why they would say you don't have to move the sensor but in my experience with their bags in my Makai I had to. I didn't initially and it got no where close to full and I would have manually flip switches off and on until it filled. Moved sensor, no more flipping switches.
I think the ‘no need move the sensor’ is from conversations with SC and WM, I am sure the all know we as owners will probably do that, but you can see ho w a boat manufacturer and aftermarket equipment maker would want that to be the official line for a few reasons… less people jumping in and modding boats on warranty that may have other impacts, say you move then sensors and something screws up (whatever it may be) and SC may have to be in a position to deny a warranty claim…. WM for certain wants to maintain a great relationship with manufacturers, to be able to develop products quickly from prototypes and working hand in hand…. They just dont want to step on SC (or any other manufacturers tes)….
I have no doubt the actual product developers and techs at WM, would ‘off the record’ state, you gotta raise your sensors, or create another hole through the hull… but the official line should be plug and play…
Think about it with things like aftermarket lift kits for trucks and the concerns everyone has with warranties there, a manufacturer should not have to take responsibility for an aftermarket product and how it was installed…. So this is how the cover their butts
I believe moving the sensor is the right thing to do, for all of the reasons you stated, and if/when these bags become available and I install I will do exactly that, and maybe beef up my engine panels a little bit more as well lol
2022 Makai
Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint - Shoreline Shade
400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
Ballast Mods: (aka TINRFD): 1500lb of lead (you read that right) and +700lb WM Bags