21SA RGB lights not working.

[larry_arizona]

It must be a breaker, but all my RGB’s are not working. All other lights work.

Looked for breaker under dash. Seems fine.

Any other RGB breakers ??


Sent from my iPhone using Tapatalk

[Josh828]

Rgb controller? Not sure how many breakers they put in these boats but the load off just the rgb lights would be so minor I could see just adding them to the lighting circuit

[Vanfamkaiyen]

I remember reading about someone else with the same issue, pretty sure it ended up being a bad controller.

[larry_arizona]

I think I know where the RGB controller is located, perhaps a reset button on the unit?

My controller is a liquid Lumens versus the standard RGB.




Sent from my iPhone using Tapatalk

[larry_arizona]

Traced 12v at the RGB controller, unit has a fan and when you turn on RGB lights, the fan doesn’t come on, thinking controller is bad.


Sent from my iPhone using Tapatalk

[Holdmybeer]

Traced 12v at the RGB controller, unit has a fan and when you turn on RGB lights, the fan doesn’t come on, thinking controller is bad.


Sent from my iPhone using Tapatalk

I know your boat is new and this is warranty. But I would bet there is a fuse under the cover of the Liquid Lumens controller. Maybe give them a call and see if there is a reset of some kind to avoid having to drop the boat off.

[larry_arizona]

Just reached out to LL, also talked to dealer, I checked everything they recommended, if I can’t figure it, it’s going in next week.

I try the easy stuff first, hope I didn’t miss something stupid and dealer says.....boom was just a breaker LOL.

Sent from my iPhone using Tapatalk

[MLA]

Make sure the rocker switch on the side of the controller did not get bumped to the off position.

[larry_arizona]

Make sure the rocker switch on the side of the controller did not get bumped to the off position.

The LL controller doesn’t have a rocker switch that I can see.

Now I am curious if there is a second RGB controller for the in boat and speaker lights??

Maybe liquid Lumens is just for the underwater lights.


Sent from my iPhone using Tapatalk

[larry_arizona]

It appears the RGB zone controller wires come out of the Vision system ECM.

Makes sense that it’s integrated there.


Sent from my iPhone using Tapatalk