Results 1 to 5 of 5
-
06-04-2021, 06:03 AM #1
2015 Moomba Mondo, depth finder not reading
The depth finder on my 2015 Moomba Mondo either reads 999 or - - -. Could it be an issue with the transducer? I have pulled in and cleaned the face of and debris. Checked connections. Is it time for a new transducer?
Sent from my iPhone using Tapatalk2015 Moomba Mondo Surf Edition
-
06-20-2022, 11:07 PM #2Junior Member
- Join Date
- Apr 2022
- Location
- Oklahoma
- Posts
- 22
I’m having the same issues with my 2015 Mojo. Did you find a solution? Where is the depth finder located? I got underneath the boat the best I could and couldn’t find it.
-
06-20-2022, 11:20 PM #3
There is a triducer. It reads depth, and water temp. More than likely it finally died.
I am waiting for the same thing to happen. If you lift the v-drive cover and look around toward the gas tank, oppisite of the bilge pump you will find it.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
06-27-2022, 09:58 PM #4Junior Member
- Join Date
- Apr 2022
- Location
- Oklahoma
- Posts
- 22
How difficult is the replacement?
-
06-27-2022, 10:46 PM #5
I changed mine and all is good now. There is an updated part number. This was the one for my ‘15 Moomba.
Sld S/O Lay 1 0 0
P/U Part Number 0 SC117395P
Description
PADDLE WHEEL, CAN TRI-DUCER
Subtotal Special Handling Sales Tax Invoice Total
Total Amount Due
DISCOVER, MASTERCARD, VISA & AMEX
Price
$484.62
Replacement is very easy and can be done in the water. Simply unplug the old unit, unscrew the collar and pull it out. There is a semi check valve in the housing that slows the water flow. Check the new unit for correct o-rings, grease the o-rings, install the new unit in the correct orientation for the paddle wheel. Connect the new unit.
Sent from my iPhone using Tapatalk2015 Moomba Mondo Surf Edition