Results 1 to 10 of 12
-
06-14-2020, 11:22 AM #1
Junior Member
- Join Date
- Feb 2019
- Posts
- 25
Clear film to protect back of boat above platform
Gents - where can I buy the clear film that is applied on back of boat right above the swim platform. Looking to protect that area from surf boards hitting it. Thanks
Sent from my iPhone using Tapatalk
-
06-14-2020, 11:55 AM #2
Senior Member
- Join Date
- May 2018
- Posts
- 4,717
VViViD 3M Scotchgard Clear Paint Protection Vinyl Film (6 Inch x 60 Inch) https://www.amazon.com/dp/B004VG8DS0..._0GK5Eb9QQ5YXT
Originally Posted by Max673
Many options on Amazon.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-14-2020, 02:14 PM #3
Junior Member
- Join Date
- Feb 2019
- Posts
- 25
Was under the impression there were pre-formed films you could purchase specific to your boat?
Sent from my iPhone using Tapatalk
-
06-14-2020, 03:10 PM #4
Senior Member
- Join Date
- May 2018
- Posts
- 4,717
Not aware of anyone doing precut, this stuff is easy to cut to any shape you want.
Take some measurements for width and order the max width you need and trim the rest.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-15-2020, 08:03 AM #5
Senior Member
- Join Date
- Aug 2015
- Location
- Mn
- Posts
- 705
Good idea. I wonder how it would work on the front of the hull, where it contacts the trailer roller. The roller leaves scuff marks over time. WOnder if this would hold up?
2020 Supra SL 400
2015 Moomba Mojo(Sold)
2018 Yamaha Waverunner(Just to fool around)
2018 F150 Lariat
sport edition, 3.5lt ecoboost
-
06-15-2020, 09:52 AM #6
Senior Member
- Join Date
- May 2018
- Posts
- 4,717
Film works great for any high traffic surfaces. Try it and if you don’t like it, it peels off.
Cheap insurance.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
06-15-2020, 03:29 PM #7
Senior Member
- Join Date
- May 2018
- Location
- Waynesville, Ohio
- Posts
- 470
A good thought. They make these for the bow also. Originally Posted by Isaguel
https://www.overtons.com/scuff-buste....5-315050.html
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
08-05-2021, 09:57 AM #8
Junior Member
- Join Date
- Feb 2019
- Posts
- 25
Ended up going with matching sea Deck on the transform above the swim platform to protect it from surf boards hitting this area. Came out great.
Sent from my iPhone using Tapatalk
-
08-05-2021, 01:25 PM #9
Senior Member
- Join Date
- Mar 2021
- Location
- South Georgia
- Posts
- 1,613
That looks great!!
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
08-05-2021, 01:29 PM #10
Junior Member
- Join Date
- Feb 2019
- Posts
- 25
Bit of a pain to install as I did it while boat was on my lift…but it turned out great. Really like it.
Sent from my iPhone using Tapatalk
Reply With Quote