Results 1 to 7 of 7
Thread: Mondo water in bilge
-
08-07-2018, 02:20 PM #1Member
- Join Date
- Aug 2016
- Posts
- 63
Mondo water in bilge
Each time we surf water fills the bilge to about 1 to 2" and the bilge pump kicks in every so often.
Is this normal? None of the bags appear to be leaking. Just wondering what I should check for if this isn't normal.
When we just cruise around there is no water.
Thanks
-
08-07-2018, 04:58 PM #2Senior Member
- Join Date
- Aug 2008
- Location
- Hilliard, Ohio
- Posts
- 794
What year Mondo? I think some people cracked their tanks when adding a bow bag. This could be your problem
-
08-07-2018, 05:15 PM #3Senior Member
- Join Date
- Jan 2018
- Location
- Lexington, KY
- Posts
- 369
I had a hole in a hose behind a finish panel that caused this on my Craz.
2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead
-
08-07-2018, 07:13 PM #4
If boat is off and your not filling bags and the bilge empty’s the water does it fill back up again?
Sent from my iPhone using Tapatalk2015 Mondo
Upgraded 900lb Rears, 250lb under Port Seat & 750lb IBS
2079 Prop
Auto Flow 2.0
Kicker Stereo: 2 800.5 amps, 2 400.2 amps, 4 KM8 towers , 4 KM10 subs & 8 KM6 cabin speakers
-
08-08-2018, 03:17 PM #5
May not be the issue at all but I get water in through the rear vents on the Max when I stop moving, putting water in the bilge only when I surf.
Sent from my iPhone using Tapatalk2018 Max with a little extra weight here and there
-
08-08-2018, 09:35 PM #6Senior Member
- Join Date
- Jan 2015
- Location
- Live: OP, KS...Boat: Shell Knob, MO
- Posts
- 167
Check the prop shaft seal while someone is driving. May still be leaking while underway but just not as bad at lower rpm.
Sent from my iPad using Tapatalk2013 Mojo
-
08-09-2018, 12:48 PM #7Member
- Join Date
- Aug 2016
- Posts
- 63