Results 261 to 268 of 268
Thread: Murder Max Mods
-
02-12-2022, 05:19 PM #261
Got the new adjustable pedestal in! Yea it’s a pain to push in that pin to raise or lower it but I didn’t really get this thing to actively change it often. More of a set it and forget kind of thing once I find the height I like. So far I have it set around 1.5-2” over stock height and that seems like it will be nice! I’ll just be glad to ditch using the bolster. Seat height can now go from stock 19” up to 24”!!
2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
-
02-12-2022, 06:50 PM #262
which riser did you install ?
-
02-12-2022, 07:48 PM #263
The same one OP used. He has a link on the first post
There are a bunch of additional pictures you can see here https://imgur.com/a/T75zrat2024 Supra SV 400 “SUPA DUPA”
2019 Moomba Max - sold"MOOMBAE"
2016 Yamaha AR192 - sold
-
07-16-2022, 11:04 PM #264Junior Member
- Join Date
- Jul 2022
- Posts
- 1
-
08-03-2022, 10:27 PM #265Senior Member
- Join Date
- Jul 2021
- Posts
- 100
Did you pull the plastic top off the helm and mat underneath? I'm getting a fair amount of buzz where that plastic top contacts the fiberglass, but can't really access it from underneath with the fiberglass. There's only a small access cutout for wires.
Great thread with lots of info!!
-
08-04-2022, 09:10 AM #266
-
08-15-2022, 02:35 PM #267Junior Member
- Join Date
- May 2018
- Location
- Calgary, AB, Canada
- Posts
- 25
-
08-15-2022, 02:54 PM #268Originally Posted by [email protected]
When I looked last winter everyone was sold out and prices were triple.
If you find them let me know where. I want to add them to my mojo.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow