Autoflow 2.0 settings

[JeffCook3]

You should check to see what settings 1-5 equate to as % deployed. I have the autoflow, which allows me to set the % deployed in 5% increments. My best wave was at 55%. I assume you'd want setting 3, but that's just assuming each setting is a 20% change.

55% on both sides?

[jtatexc]

55% on both sides?

A few runs now 3-5 people and am getting 55 both sides as best wave. Def between 50 and 60 for us

Sent from my SAMSUNG-SM-G930A using Tapatalk

[mattsask]

Are you shifting people to the surf side or letting them sit wherever they want?

Sent from my SM-G900W8 using Tapatalk

[07STI]

Agreed with 50-60%. I would favor towards the surf side with weight of passengers. Don't need everyone on the surf side, but favor it.

We've got rain most of the weekend, so I'm still waiting to get out on deeper water to give the wave true tests. I'm hopeful that I can add more weight up front to get a longer wave than when I was in shallow water.

[blackcup]

You should check to see what settings 1-5 equate to as % deployed. I have the autoflow, which allows me to set the % deployed in 5% increments. My best wave was at 55%. I assume you'd want setting 3, but that's just assuming each setting is a 20% change.

Yeah so each LED represents 20%. LED 3 = 60%. LED 4 = 80% etc. Unfortunately doesn't look like I get to really DIAL it in like you guys do with the 5% increments.

[blackcup]

So got it back out today for another run. MUCH BETTER than the last one ... kept the plate at about 50-60% deployed. Surf side bags were 100%, non surf bags 80%, IBS full. Added a 500lb bag on the goofy side under the seat. Had the wakeplate fully engaged today and it seemed to have the most push but it wasnt terribly long.

Definitely a "different" wave then what the manual flow was giving but that isn't a bad thing. Just need more time to get used to it ... but was able to ride ropeless quite easily. I'm sure it will only get better as we add people and as I get used to it a bit more.

Has anyone with the new 2.0 plates tried added the wakeshaper to the side?

[mattsask]

So got it back out today for another run. MUCH BETTER than the last one ... kept the plate at about 50-60% deployed. Surf side bags were 100%, non surf bags 80%, IBS full. Added a 500lb bag on the goofy side under the seat. Had the wakeplate fully engaged today and it seemed to have the most push but it wasnt terribly long.

Definitely a "different" wave then what the manual flow was giving but that isn't a bad thing. Just need more time to get used to it ... but was able to ride ropeless quite easily. I'm sure it will only get better as we add people and as I get used to it a bit more.

Has anyone with the new 2.0 plates tried added the wakeshaper to the side?

Just waiting for my suction cut to get here and I'll let you know.

Sent from my SM-G900W8 using Tapatalk

[BrettLee3232]

I went out this weekend and made a slight adjustment & made the wave a little better. I went from 10.3 to 10.8mph & adjusted the wake plate from 100% down a little bit to get a longer wave. Most people was 50-60% I like it at 60-100% for me but I'm a fat ass. The wave was super steep and long and it was by far the best wave behind my boat to date. Flow was at 65%.

My goofy wave was improved drastically as well. I only filled the port bag maybe 25% everything else was full. Wake plate 50-100% depending on rider and flow at 100%. Speed 10.8.

I could never ever get a decent looking goofy wave when the boat was evenly weighted. I only got a picture of the goofy wave when my buddy was at optimal angle for a perfect fit haha




Sent from my iPhone using Tapatalk

[Wax]

Definitely a "different" wave then what the manual flow was giving but that isn't a bad thing. Just need more time to get used to it ... but was able to ride ropeless quite easily.

I'm glad you're riding ropeless now...when you said you were trying to ride hopeless before, I was a little concerned about your well being.

[kaneboats]

Got nothing on BretLee's buddy who ride's BOARDLESS!