Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2006
    Location
    the Netherlands
    Posts
    43

    Default Perfect pass setting for a LSV 2006

    I've problems with the pp in my new Mobius LSV. the pp is not able to hold a steady speed.
    the speed is changing alot en the pp makes a lot of corrections, so I get almost seesick by driving the boat.
    Can anyone help me by telling me what the best KDW and NN settings are for the perfect pass.
    It's a new Mobius LSV with the standard centre tank and wakeplate.

    A new proud Moomba owner!!
    2017 Moomba Craz surf max edition

  2. #2
    Join Date
    Oct 2005
    Location
    Central FL
    Posts
    791

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    Are you using wakeboard mode or slalom mode? What speed ? I can check mine this weekend for you. I did a sinlgle minor adjustment to mine but forgot which setting.

    -J

  3. #3
    Join Date
    Jan 2006
    Location
    the Netherlands
    Posts
    43

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    I've made some changes in the settings for the KDW it is 130 and for the NN it is 140, It's much better but the speed will stil drift a bit..

    question: can I get a steady speed with pp or will it still do some drifting???
    2017 Moomba Craz surf max edition

  4. #4
    Join Date
    Feb 2006
    Location
    Lynchburg Va
    Posts
    68

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    you can download the manual on the PP website. I have a 05 Mobius LSV and mine was drifting really bad. It was actually set for the wrong motor. THe manual will tell you how to reset or make adjustments . I kept tweeking mine a little at a time and now it works great. Hope this helps.

  5. #5
    Join Date
    Feb 2006
    Location
    Lynchburg Va
    Posts
    68

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    BTW Congrats on the new boat !!

  6. #6
    Join Date
    Mar 2003
    Location
    s.e. washington state
    Posts
    3,071

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    I don't have the PP but I do know some stuff about control systems and first I would assume the PP is working as designed and look at the mechanical linkage and brackets to see if there is any "slop" in the cable or flexing of brackets that would cause the system to overshoot throttling up and throttling down. I would get on the water and observe the system operating. Second, I would try to swap out modules to see it that corrects the problem. Third, I would try to change the sampling rate of the PP if that is possible. The mechanical components may be a limiting factor so you may have marginal success. Good luck.
    1998 Mobius
    310 HP PCM
    SOLD

  7. #7
    Join Date
    Apr 2005
    Location
    La Paz, baja. MEXICO
    Posts
    72

    Default Replying to Topic 'Perfect pass setting for a LSV 2006'

    I had that problem few months ago, i post it then. The socket that conects the pp sensor at the bilge with the computer was getting wet in fact was scuba diving in the bilge. I cleaned the socket and put it far away from the water, then i've fix the water in the bilge.

    good luck

    Simon

Similar Threads

  1. Perfect Pass help
    By gsi09907 in forum General Chat
    Replies: 0
    Last Post: 06-19-2007, 08:57 PM
  2. PERFECT PASS OR NO?
    By TXZach in forum Sales & Information
    Replies: 12
    Last Post: 06-08-2006, 11:51 AM
  3. Perfect Pass
    By XLV Jay in forum Wakeboarding | Wakeskating
    Replies: 8
    Last Post: 11-25-2004, 05:46 PM
  4. XLV perfect pass
    By patrick37 in forum General Chat
    Replies: 5
    Last Post: 08-16-2004, 07:23 PM
  5. Perfect Pass
    By SoTX in forum General Chat
    Replies: 4
    Last Post: 06-20-2004, 10:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •