Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2013
    Location
    Northeast, PA
    Posts
    235

    Default How To Replace Belts?

    I wondering anyone can tell me how hard it is to replace the belts on 07 OBV? Dealer gave me a quote to Replace both belts. $68 for serpentine belt $18 for other belt and $130 for labor. I think I can do it myself and save myself at least $130 but wanted to check to make sure I can handle it before I start tearing into it.
    2007 Moomba Outback V

  2. #2
    Join Date
    Jul 2012
    Location
    Cumming Ga
    Posts
    348

    Default

    What a rip off. You basically have a car engine, the same exact way you replace the belts on a car is the same method you use to replace boat belts. I would just youtube belt replacement and there should be 100 different videos.

  3. #3
    Join Date
    Jul 2013
    Location
    Windsor ON
    Posts
    197

    Default How To Replace Belts?

    Easy to replace. I replaced the serpentine belt a few weeks ago. Bought the belt locally and for about $20. Only issue was I had to take off the water pump to remove the belt. A bit of a pain but well worth it to save money so you can buy more stuff for your boat.
    Good luck.

  4. #4
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,232

    Default

    You just have to take the two bolts out that hold the impeller pump bracket to the block.
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •