Results 1 to 4 of 4
Thread: Stock Amp Rack
-
02-28-2014, 08:24 AM #1
Stock Amp Rack
I ordered my new LSV with just the standard stereo and 4 in boat speakers, and I was told that the boat would not come with the amp rack. I ordered the onboard charger, which is usually mounted to the amp rack. Does anyone know if the amp rack will now be included?
Joe
2014 LSV
2010 Outback V - Sold
1993 Echelon
-
02-28-2014, 10:00 AM #2
Not getting the stock amp rack could be a good thing. One particular tow boat manufacturer pre-cuts 3 large squares out where the amps will go, before wrapping the carpet over the board. The was is useless if your plan is to do anything other than the 3 OEM amps in the OEM arrangement. One other only cuts the rack to fit the 2 OEM options. SO again, its no use if you are doing more than 2 or larger amps then the factory offerings. Building your own allows you to lay out the components like you want.
Ive collected 3 of them, in which we cut up and use the HDPE for fabrication on other projects.
-
02-28-2014, 01:19 PM #3
I can't speak for sure, but the Mojo when we got it was ordered as a Stock stereo with Bow Speaker option and charger. It had an amp rack, they mounted the charger, amp, circuit breaker and ground block to it.
I had to take it out because it was too small.
Slightly different now.
If for some reason you dont get a rack, and want one I kept my factory one and we can talk about measurements and see if it will fit.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
02-28-2014, 08:33 PM #4
think my amp board looked like Mikes in the above photo, I ordered the bow speakers
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart