Quote Originally Posted by rsinger View Post
I've also ratchet tied the back of my platform to the bar across the stern, pulling the back of the platform up a bit. My platform has a tube running along the perimeter of it, which is the anchor point. It helps stem avoidable vibration on the platform mounts. Those torsion axles are really stiff. I doubt anyone else does this, but it's just a thought.
I loop an extra tie down strap through the mounts underneath the platform and cinch it down to the trailer. It takes all the slack out of the platform mount holes and pins so it doesn't rattle. I have a designated strap for this b/c I tow about 40 min. each way every time we go out.

Also: Make sure your lug wrench fits the trailer lugs. Take them off, grease them and put them back on before you go. Make sure you can actually get your spare off your trailer mount. Make sure you have a jack that works with the trailer. Check your trailer brakes too.