I need a cushion repaired

[mmandley]

Last winter I had a mouse chew an edge of my seat and also a small piece of the rolled trim piece and never got it fixed. I'd like to get it repaired and am not sure where to start or who to contact so I figured I'd ask you folks first?

Honestly i would call your Dealer, see if they can get you the matieral, if not then let me know i have some contacts to get things such as these.

Then you can take it to an upholstery shop and get it fixed.

[kaneboats]

i have some contacts to get things such as these.

See if you can find out who made the sandrock vinyl in 2008. My dealer is gone. I checked on ordering one cushion cover and it was something like $350. Lotta dough for one small hole. I'd rather just replace the damaged panel and put the cover back on.

[mmandley]

See if you can find out who made the sandrock vinyl in 2008. My dealer is gone. I checked on ordering one cushion cover and it was something like $350. Lotta dough for one small hole. I'd rather just replace the damaged panel and put the cover back on.

Which cusion is it? I had a small tear fixed in my LSV engine cover and it was 150 total, you would never known it was tore and that was after 3 summers of covering it with our towel LOL

[kaneboats]

Starboard side, rear seat cushion -- the kinda long one that jams way up under the backrest in the corner. It's only damaged on the easy, flat sandrock colored part, not on the fatter inside edge. Would be fairly easy to fix. I had cut a tiny circle of material from the back of the driver's seat cushion where there was extra material and glued it in the hole but it came out the other day so it looks terrible.

[mmandley]

Starboard side, rear seat cushion -- the kinda long one that jams way up under the backrest in the corner. It's only damaged on the easy, flat sandrock colored part, not on the fatter inside edge. Would be fairly easy to fix. I had cut a tiny circle of material from the back of the driver's seat cushion where there was extra material and glued it in the hole but it came out the other day so it looks terrible.

I can see if they can get the matching material but honestly to do it right, i would ship it here for the guy i use to fix it then ship it back LOL.

[kaneboats]

I have a guy that can make covers. I'll strip it and put it back on myself. I keep stainless staples for these jobs. All the upholstery guy has to do is remove and replace the damaged part of the cover and sew it back up. He did a great job on all the covers on my Outback. The curved one piece backrest on the back seat was a major PITA but he got it to fit perfectly. It looked fantastic.

[mmandley]

OK well ill see if i can find the color you need, i know the color because its the same as my 08 had in it.